LAN Hotel Lock System Encoder with RJ45 Ethernet Port
RJ45 Ethernet Interface
Power by DC adaptor
LAN based system
Serves LAN Hotel Lock System
System Diagram
Specification
Server the hotel staffs to make /read all the cards
Hotel staff can use this encoder to
- Make set-up cards to configure and check door locks.
- Make guest cards to unlock the door.
- Staff cards that unlock the a wide range of rooms by one single card.
- Read card information, show the card type and unlock authority.
IC card reader standard, Fingerprint model optional
Besides Standard RFID card model, the LAN Hotel Lock System Encoder also have Fingerprint version available to order, to support issue fingerprint on the font desk and use on the fingerprint locks in room. This feature is useful for projects like school, apartments. Requires the GW05 Gateway and fingerprint lock model to work.
RJ45 Interface
The device connect via Ethernet interface, standard RJ45 connector. Data will be transmit all over LAN network to the server control.
Easy to change user
Since the encoder is not connect to the staff’s end point by usb, it allows the device easily change a user by software, no matter is shift change, or other usage request. The control of one encoder can change to anther use by one click, no need to do hardware pull and plug.
DC Powered by 12V
The Lan hotel lock system encoder use stand alone 12V DC to power up, there will be no limitation on how to supply the power to the unit. Compare to the USB type encoders, it does not require any driver, or get issue with the USB 0.5A current limitation. For users using 110V power, they can also easy to power up since the 12V power adapter is widely used.
Standard ISO 14443 Type A Reader
With the powerful API integration, you can use this encoder as a standard encoder too, to make cards for other system like other type of access control, it will get you the ability to allow the guest use one card on different place. ISO 14443 is standard of 13.56Mhz IC card, also know as M1.
